Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
MS-7672 Mainboard
MS-7672 Mainboard
Front USB 2.0 Connector: JUSB1/ JUSB2/ JUSB3
This connector, compliant with Intel
necting high-speed USB interface peripherals such as USB HDD, digital cameras, MP3
players, printers, modems and the like.
The
JUSB1 (red mark)
vides fast charging function anytime for charging your Smartphone.
If your system is in S0 / S1 state, you must install MSI's application, SuperCharger, to
control the JUSB1. When the application is set to "On", it can fast charge Smartphone
via
JUSB1
but the data transmission and synchronization will be disabled. When the
application is set to "Off", the
S5 state,
JUSB1
matter you un-plug and re-plug the Smartphone.
USB 2.0 Bracket (optional)
Important
•
Note that the pins of VCC and GND must be connected correctly to avoid possible
damage.
For iPad,
JUSB1 (red mark)
•
•
Please note that connecting one device once for stable charging is recommended.
•
Super-Charger technology would be available on specific models, please refer to MSI
website for model support list.
•
We recommend that don't disconnect the device when you charge it in S1 state.
En-18
I/O Connectivity Design Guide, is ideal for con-
®
supports the MSI newly Super-Charger technology which pro-
JUSB1
will work as a normal USB connector. In S3 / S4 /
can still provides fast charging function without operating system, no
* The MB layout in this figure is for reference only.
can still charge iPad in S3, S4, S5 state.
Publicité
Table des Matières
