Back Panel - MSI Z68A-GD80 Serie Mode D'emploi

Back Panel

USB 2.0 Port
IEEE 1394 Port
Optical
S/PDIF-Out
Keyboard/ Mouse eSATA Port
Clear CMOS button
▶ Optical S/PDIF-Out
This S/PDIF (Sony & Philips Digital Interconnect Format) connector is provided for digi-
tal audio transmission to external speakers through an optical fiber cable.
▶ Mouse/Keyboard
The standard PS/2
▶ Clear CMOS Button
There is a CMOS RAM on board that has a power supply from external battery to keep
the system configuration data. With the CMOS RAM, the system can automatically
boot OS every time it is turned on. If you want to clear the system configuration, use
the button to clear data. Press the button to clear the data.
Important
Make sure that you power off the system before clearing CMOS data.
After pressing this button to clear CMOS data in power off (G3) state, the system will
boot automatically.
▶ IEEE 1394 Port
The IEEE 1394 port on the back panel provides connection to IEEE 1394 devices.
▶ USB 2.0 Port
The USB 2.0 port is for attaching USB 2.0 devices such as keyboard, mouse, or other
USB 2.0-compatible devices.
▶ USB 3.0 Port
USB 3.0 port is backward-compatible with USB 2.0 devices. Supports data transfer rate
up to 5 Gbit/s (SuperSpeed).
Important
If you want to use a USB 3.0 device, you must use the USB 3.0 cable to connect to the
USB 3.0 port.
LAN
USB 2.0 Port
mouse/keyboard DIN connector is for a PS/2
®
DVI-I Port
LAN
USB 3.0 Port HDMI Port
RS-Out
Line-In
CS-Out
Line-Out
Mic SS-Out
mouse/keyboard.
®
En-13