Buttons - MSI Z68A-GD80 Serie Mode D'emploi

MS-7672 Mainboard MS-7672 Mainboard

Buttons

This section will explain how to change your motherboard's function through the use of
following buttons.
OC Genie Button: TURBO1
This button is used to auto-overclock for the system. Press this button to enable the
OC Genie function when the system is in power off state, meanwhile, the button will
light and lock. And then the system will automatically detect the optimum values to
overclock after booting the system. To disable the OC Genie function, please press the
button again after power off the system, meanwhile, the button light will off and unlock,
and the system will restore the default for next boot.
Important
Please install the DDR3 1333 and up memory and equip better heat sink/ cooler with
OC Genie function.
We do not guarantee the OC Genie overclocking range and the damages or risks
caused by the OC Genie overclocking behavior.
You can disable the OC Genie function in BIOS setup. We suggest you save the OC
Genie configuration to overclocking profile in BIOS for future using.
Power Button: POWER1
This power button is used to turn-on or turn-off the system. Press the button to turn-on
or turn-off the system.
Reset Button: RESET1
This reset button is used to reset the system. Press the button to reset the system.
En-24