MS-7672 Mainboard
MS-7672 Mainboard
▶
eSATA Port
The eSATA (External SATA) port is for attaching the eSATA hard drive.
▶
LAN
The standard RJ-45 LAN jack is for connection to
the Local Area Network (LAN). You can connect a
network cable to it.
LED
Color
LED State
Left
Yellow
Off
On(Steady state)
On(brighter & pulsing)
Right
Green
Off
On
Orange
On
▶
HDMI Port
The High-Definition Multimedia Interface (HDMI) is an all-digital audio/video interface
capable of transmitting uncompressed streams. HDMI supports all TV format, includ-
ing standard, enhanced, or high-definition video, plus multi-channel digital audio on a
single cable.
▶
DVI-I Port
The DVI-I (Digital Visual Interface-Integrated) connector can be connected to a LCD
monitor, or a CRT monitor with a adapter. To connect an monitor, please refer to the
monitor manual for more information.
Important
The HDMI and DVI-I display interfaces on the mainboard are designed to serve as IGP
(Integrated Graphics Processor) used. If you installed a processor without integrated
graphics chip, these display ports will have no effect.
▶
Audio Ports
These audio connectors are used for audio devices. It is easy to differentiate between
audio effects according to the color of audio jacks.
■
Line-In: Blue - Line In, is used for external CD player, tape-player or other audio
devices.
■
Line-Out: Green - Line Out, is a connector for speakers or headphones.
■
Mic: Pink - Mic, is a connector for microphones.
■
RS-Out: Black - Rear-Surround Out in 4/ 5.1/ 7.1 channel mode.
■
CS-Out: Orange - Center/ Subwoofer Out in 5.1/ 7.1 channel mode.
■
SS-Out: Gray - Side-Surround Out in 7.1 channel mode.
En-14
Yellow
Condition
LAN link is not established.
LAN link is established.
The computer is communicating with another computer on the LAN.
10 Mbits/sec data rate is selected.
100 Mbits/sec data rate is selected.
1000 Mbits/sec data rate is selected.
Green/ Orange