Specifications - Echo HCAS-236ES-LW Manuel D'utilisation

Specifications

Mass:
Unit with specified cutting attachment, empty tank
Unit with specified cutting attachment, full tank
Volume: Fuel tank
Cutting device:
Type
Cutting length
Pitch
Height
Gear ratio and lubrication:
External Dimensions: length × width × height
Engine:
Type
Engine displacement
Maximum shaft brake power, measured in accordance with ISO
8893
Engine speed at maximum engine power
Recommended maximum engine speed (With STD attachment
installed)
Recommended engine idling speed
Carburettor
Ignition
Spark plug
Starter
Clutch
Fuel:
Oil
Ratio
Fuel consumption at maximum engine power
Specific fuel consumption at maximum engine power
Sound Pressure Level: (ISO 10517) L
Sound Power Level: (ISO 10517) L
Vibration levels: (ISO 10517) a
Front handle
Rear handle
Uncertainty:K
These specifications are subject to change without notice.
(= L + K )
pAd pAeq pA
(= L + K )
WAd WAeq WA
hv,eq
Specifications
HCAS-236ES-LW
kg 5.9
kg 6.2
L 0.44
Dual action, double sided
mm 519
mm 30
mm 20
5.63 reduction and good quality urea-base grease
mm 1749 × 246 × 235
Air cooled Two stroke single cylinder
mL (cm³) 21.2
kW 0.67
r/min 8000
r/min 11000
r/min 3000
Diaphragm type
Flywheel magneto - CDI system
NGK BPMR8Y
Recoil starter
Automatic Centrifugal
Use 89 octane unleaded. Do not use fuel contain-
ing methyl alcohol, more than 10% ethyl alcohol or
15% MTBE. Do not use alternative fuels such as E-
20 or E-85.
50:1 ECHO Premium oil, ISO-L-EGD (ISO/
CD13738) and JASO M345-FC/FD, two-stroke,
air-cooled engine oil.
50 : 1 (2 %)
L/h 0.45
g/(kW•h) 469
dB(A) 94.3
dB(A) 106.2
m/s² 4.5
m/s² 7.3
m/s² 5.0
30