Radio Operation - SOUNDMASTER high line TR 50USB Mode D'emploi

Instructions for LCD Display
Figure III
?
1. FM Stereo symbol
2. "Sleep mode" symbol
3. Display for signal strength, S/N and clock time
dBu: unit for "signal strength"
dB: unit for "S/N"
4. Memories indication
5. Symbol for quantity of electricity (batterybar)

RADIO OPERATION

Your radio is equipped with two wavebands to enable you to select the programmer of your choice. The FM
band uses an external telescopic antenna which should be fully extended and rotated for best reception. AW is
received by an internal antenna which is directional. To achieve the best reception, it may be necessary to
rotate the radio.
1. Power Switch
Press "POWER/SLEEP" key to switch on the radio, the LCD Display lights up, the information of band, the
frequency number (8) before the latest switching off and the number of "00" (SLEEP set state) will show on
LCD display (Figure III). You can search station while "00" turn to "dB and dBu".
Press again to power off the radio and the clock time (8) will show on LCD display (Figure III)
"SLEEP" setting
Press "POWER/SLEEP" key to power on the radio, the number of "00" will show on LCD display (Figure III),
turn "TUNE/LOCK" to select the sleep time you want (0, 10, 20, 30 , 40, 60 or 90 minutes), turn to "00" minute
to cancel setting and the sleep symbol will disappear. The sleep symbol (1) will light up while set and the radio
will power off automatically when the sleep time is over (Figure III).
Attention:
if the radio failed to power on, please check if the batteries are inserted correctly and the quantity
of electricity is full or the radio is locked. The lock symbol (10) Figure III will be on if radio is locked, then press
"TUNE/LOCK" a time to unlock.
2. Listen to the Broadcasting
This product will on "Radio" mode while powered on. Press "FM/AM" key to select the band, turn the
"TUNE/LOCK" to select the radio program you desired and set a moderate volume. Pull out the antenna fully
and rotate for better FM reception.
(1) (2)
(10)
(9)
(3) (4)
6. Symbol for AC power supply
(8)
7. Frequency unit for AM and FM
8. Frequency numbers and clock time (while
switching off) indication
9. Band indication
10. Lock symbol
(5)
(6)
(7)