Charging A Stand-Alone Battery - Motorola Solutions CLS Serie Guide D'utilisation

MN006468A01-AB
Chapter 1: Product Overview
4 Turn the radio off.
5 Insert the radio into the tray with the front of the radio facing the front of the charger, as shown.
1.4

Charging A Stand-Alone Battery

To charge a battery, insert the battery into the charger pocket by:
Procedure:
1 Aligning the raised tab on each side of the battery with the corresponding groove on each side
of the charger pocket.
2 Pressing the battery toward the rear of the pocket.
3 Sliding the battery into the charger pocket, ensuring complete contact between the charger and
battery contacts.
8
CLS SUC Tray