Motorola Solutions CLS Serie Guide D'utilisation page 10

MN006468A01-AB
Chapter 1: Product Overview
Batteries can charged inside the radios or removed and place in the MUC separately. Each of the 6
charging pockets on the MUC can hold a radio or battery. Batteries are charged in 3 to 6 hours.
Procedure:
1 Insert the power cord plug into the jack on the MUC.
2 Plug the cord into an AC outlet.
3 Turn the radio off.
4 Insert the radio or battery into the charging pocket.
Pocket 2
Pocket 1
LED Charging
Status
NOTICE: The charging status LED is solid red when the battery is charging, and solid green
when charging is complete.
1.7
Cloning Radio Settings
The cloning feature duplicates radio settings for radio fleet configuration of the CLS Series radios. All
selectable settings are sent from one radio (the source) to a second radio (the target).
When and where to use:
You can clone only one radio at a time. A multi-channel radio can clone to a single-channel radio, but
only the first channel is cloned. When cloning, the MUC does not need to be plugged into a power
source, but ALL radios require charged batteries.
Procedure:
1 On the source radio, press and hold Push to Talk and
radio ON. The radio beeps and display
2 Place the source radio in one of the charging pockets.
3 Turn the target radio ON and place it in the charging pocket that is paired with the pocket
containing the source radio. There are 3 paired charging pockets as indicated by the 3 pairs of
charging status LEDs (pocket 1-2, 3-4 and 5-6).
10
Battery charging pocket
Radio charging pocket
Pocket 3
Pocket 4
Pocket 5
.
PROG
031102o
Pocket 6
MON
for 3 seconds while turning on the
LED