Ryobi OGS1820 Manuel D'utilisation page 15

GB
F D E
Clear the area of children, bystanders, and pets. At a
■
minimum, keep all children, bystanders and pets outside
a 15 m radius; there still may be a risk to bystanders
from thrown objects. Bystanders should be encouraged
to wear eye protection. If you are approached, stop the
unit immediately.
To avoid the risk of electric shock, do not operate unit
■
in damp or wet locations.
Do not handle the unit with wet hands.
■
Do not allow children under the age of 15 or untrained
■
individuals to use this grass shear / shrubber.
To reduce the risk of injury, always wear full eye
■
protection, footwear, goggles and clothing when using
this machine.
Wear a face or dust mask if the operation is dusty.
■
Dress properly. Do not wear loose clothing or jewellery;
■
they can be caught in moving parts. Use of rubber gloves,
substantial footwear and long trousers is recommended
when working outdoors.
To prevent hair from being drawn into nearby air vents
■
and becoming entangled in moving parts, wear protective
hair covering to contain long hair or secure covered hair
above shoulder level.
When transporting or storing the machine always fi t with
■
blade cover.
Always be aware of your surroundings and stay alert
■
for possible hazards that you may not hear due to the
noise of the machine.
Form the habit of checking to see that keys and adjusting
■
wrenches are removed from the tool before turning it
on.
Always ensure all the handles and guards are fi tted
■
when using the tool.
Never attempt to use an incomplete machine or one
■
fi tted with an unauthorised modifi cation.
WHILE OPERATING
To avoid accidental starting, never carry your unit with
■
your fi nger on the trigger.
Stay alert and pay attention to what you are doing.
■
Use common sense when using this grass shear /
shrubber.
Wear heavy, long pants, substantial footwear and well
■
fi tting gloves. Do not wear short pants, sandals or go
barefoot.
Do not operate in poor lighting. Use the unit only in
■
daylight or good artifi cial light.
I P NL S DK N FIN GR HU CZ RU
English
Do not overreach or stand on unstable support. Keep
■
good footing and balance at all times. Do not use on
ladder.
Do not force the grass shear / shrubber. It will do the
■
job better and with less likelihood of a risk of injury at
the rate for which it was designed.
Release the trigger, allow the motor to stop, and remove
■
the battery pack before performing maintenance, repair,
or making adjustments.
Use grass shears for cutting grass and light weeds
■
only.
Use shrubber for cutting hedges, bushes and shrubs
only.Do not use for any other purpose.
Before starting the unit, make sure the cutting blades
■
will not come in contact with anything. If you strike or
become entangled with foreign objects, stop the unit
immediately, remove the battery pack and check for
damage. Do not operate before repairing damage. Do
not operate the unit with loose or damaged parts.
Watch what you are doing. Use common sense.
■
Maintain grass shear / shrubber with care. Keep cutting
■
edge sharp and clean for best performance and to reduce
the risk of injury. Follow instructions for lubricating and
changing accessories. Keep handles dry, clean, and
free from oil and grease.
Check damaged parts. Before further use of the
■
grass shear / shrubber, a guard or other part that is
dam-aged should be carefully checked to determine
that it will operate properly and perform it's intended
function. Check for alignment of moving parts, binding
of moving parts, breakage of parts, mounting, and any
other condition that may affect it's operation. A guard or
other part that is damaged should be properly repaired
or replaced by a Authorised Service Centre unless
indicated elsewhere in this manual.
Risk of cut. Keep hands away from blades. Do not attempt
■
to remove cut material or hold material to be cut when
blades are moving. Make sure battery pack is removed
and the trigger is released when clearing jammed
material from blades. Do not grasp the exposed cutting
blades or cutting edges when picking up or holding the
unit.
Keep hands, face, and feet at a safe distance from
■
moving parts. Do not touch or try to stop the cutting
blades when they are moving.
Always stop the motor when cutting is delayed or when
■
walking from one cutting location to another.
10
RO PL SLO HR TR EST LT
CAUTION
Blades coast after unit is turned off.
LV SK BG