Quax INDIGO 54 03 55-3D Serie Manuel page 40

INDIGO
Quax
First dreams
®
First steps
Step 13 : Use the six support slats EB10 and six eccentrics H
Push an eccentric (H) in the drillings at the end of each bottom slat (EB10).
Step 14 : Use the parts of steps 10 to 13
Push the drawer backs (EB8) with their wooden dowels into the holes and over the connectors of the drawer
sides (EB9 LH and RH). Tighten the eccentrics. Push the drawer sides with their wooden dowels into the holes
and over the connectors of the drawer fronts (EB7). Tighten the eccentrics.
Step 15 : Use the parts of step 13 and 14, three drawer bottoms EB11, twelve wood screws K and twelve wood
screws L
Push each drawer bottom (EB11) in the grooves of the sides and the fronts of the drawer. Attach each bottom
to the drawer back with the wood screws (K). Push the support slats (EB10) on the drawer front connectors and
tighten the eccentrics. Attach the support bars by means of the wood screws (L) to the drawer backs.
40
54 03 55xx-3D
Commode met drie laden
Kommode mit drei Schubladen
Commode avec trois tiroirs
Chest of three drawers