Quax INDIGO 54 03 55-3D Serie Manuel page 38

Table des Matières

Les langues disponibles

INDIGO

Quax

First dreams

First steps

Step 8 : Use the parts of steps 3 to 6

Push both bottom slats (EB3) with their wooden dowels in the drillings and over the connectors of the left side

(EB2 LH), tighten the eccentrics and hold the slats. Push both crossbars (EB4) with their wooden dowels in the

drillings and over the connectors of the side, tighten the eccentrics and hold the slat. Push the upper slat (EB5)

with its wooden dowels in the drillings and over the connectors of the side, tighten the eccentric and hold on.

Now push the right side (EB2 RH) with its connectors in the drillings and over the wooden dowels of all slats and

tighten the eccentrics. Put the top (EB1) upside down on a clean blanket, push the structure with its wooden

dowels into the holes and over the connectors of the top and tighten the eccentrics.

Step 9 : Use the parts of step 7, both backs EB6, the back proﬁ le M and twenty wood screws K

Place the structure with its front on the blanket. Slide the backs (EB6) into the proﬁ le (M). Place the backs parallel

to the back of the structure. Check if distance A = B. Now ﬁ x the backs on the structure with the wood screws (K).

54 03 55xx-3D

Commode met drie laden

Kommode mit drei Schubladen

Commode avec trois tiroirs

Chest of three drawers

Table des Matières