Start-Up And Operation - Hama QI-FC15 Mode D'emploi

Warning
Ensure that there are no metal parts on the back of your device. Metal heats up
signi cantly in the eld of an induction charger and can damage your device and/or the
charger.
Risk of electric shock
• Do not open the device or continue to operate it if it becomes damaged.
• Do not use the product if the
AC adapter, the adapter cable or the mains cable are damaged.
• Do not attempt to service or repair the product yourself. Leave any and all service work
to quali ed experts.

4. Start-up and operation

Note
• To be able to charge your device via the wireless charger, it must be compatible with
induction charging technology. Please refer to the operating instructions of your device
for more information.
• Note that mobile phone cases, covers, etc., and other materials between the wireless
charger and the back of your device may interfere with or even prevent the charging
process.
• Connect the enclosed USB-C cable to the USB-C input (1) on the wireless charger and
a suitable USB charger. To do this, consult the operating instructions for the USB charger
you are using.
• When the power supply is active, the status LED (2) lights up red.
Warning
• Only use suitable charging devices or USB ports to charge the product.
• Do not use defective chargers or USB ports and do not attempt to repair them.
• Place your device with its back on the inductive charger (B).
• The charging process begins as soon as an effective induction eld has been established.
The colour of the status LED (2) changes to blue. The current charge status is displayed
on your device.
• If no induction connection can be established, change the position of your device if
necessary (B).
• The charging process ends automatically once your device's battery is fully charged. The
status LED (2) goes out.
• Remove your device from the wireless charger and disconnect the wireless charger from
the power supply.
Note
The maximum charging power of up to 15 W is guaranteed with an appropriate Qualcomm
quick-charging device. Refer to the technical speci cations of the inductive charger for this.
4