Getting Started And Operation - Hama FC-10 FABRIC Mode D'emploi

• Dispose of packaging material immediately according to locally applicable regulations.
• Do not modify the product in any way. Doing so voids the warranty.
Do not put any bank cards or similar cards with magnetic strips, or other magnetically
sensitive objects, on the product. The data on the cards could be damaged or deleted.
Warning
Ensure that there are no metal parts (for example, metal plate for magnetic holder) on the
back of your terminal device. Metal may heat up signi cantly in the eld of the induction
charger, causing damage to your terminal device and/or the charger.

4. Getting Started and Operation

Note
• To be able to charge your terminal device using the inductive charger, your terminal
device must be compatible with inductive charging technology. Please read the
operating instructions of your device.
• Note that the presence of mobile phone cases, covers or other materials between the
inductive charger and the back of your terminal device can interfere with charging or
even prevent it.
• Connect the included Micro-USB cable to the Micro-USB input (1) on the inductive
charger and to a suitable USB charger. Please refer to the operating instructions for the
USB charger used.
• Successful connection to a power supply is indicated by the red status LED (2).
3