General Information; Reading And Keeping The Instructions For Use; Explanation Of Symbols; Safety - ProCharger 10037598 Mode D'emploi

3 | General information

3.1 | Reading and keeping the instructions for use

These instructions for use apply to the ProCharger Battery Monitor.
They contain important information on operation and handling.
Read the instructions for use carefully, in particular the safety
instructions, before using the ProCharger Battery Monitor. Failure
to adhere to these instructions for use can lead to serious injury
or damage to the device. The instructions for use are based on the
standards and regulations applicable in the European Union and
refl ect the current state of technology. If abroad, also observe coun-
try-specifi c guidelines and laws. Keep the instructions for use safe
for future reference. If you pass the ProCharger Battery Monitor on
to a third party, ensure that you include the instructions for use.

3.2 | Explanation of symbols

The following symbols and signal words are used in these
instructions for use, on the ProCharger Battery Monitor or on the
packaging.
This signal symbol/word indicates a
hazard with a medium risk level which,
WARNING!
if not avoided, may result in death or
serious injury.
This signal symbol/word indicates a
hazard with a low risk level which, if not
CAUTION!
avoided, may result in minor or moderate
injury.
This signal word warns of possible mate-
NOTE!
rial damage.
26
This symbol gives you useful additional
information about assembly or usage.
This symbol indicates that the packaging
and product itself can be recycled.
Declaration of Conformity (see section
entitled "Declaration of Conformity"):
Products marked with this symbol comply
with all applicable Community regulations
of the European Economic Area.
This symbol indicates an industry
standard for short-range data
transmission between two devices using
radio technology.
Devices marked with this symbol must not
be disposed of in household waste.

4 | Safety

4.1 | Intended use

The ProCharger Battery Monitor is used to monitor motorcycles'
battery, starting and charging voltages. If the product is attached
to the vehicle battery, Bluetooth 4.0 can be used to establish a
connection to a mobile device. If any problems occur in relation
to the battery, starting or charging voltage, the monitor can send
notifi cations directly to the user. The user can also view and check
the recorded trip data using the app.
Install the ProCharger Battery Monitor so that it is protected from
splash water. Only use the ProCharger Battery Monitor as described
in these instructions for use. Any other use is considered improper
use and may result in material damage. The manufacturer or
27