Apex XT Prime Instructions D'utilisation page 9

XT Prime /English
3. Installation
3.1 Unpacking
To secure its contents inside, the CPAP device and accessories are bundled in a paper packaged
box. Unpack this box by removing the CPAP and its accessory and checking for any damage,
which may have occurred during shipping. If there are damages, please contact your dealer
immediately.
3.2 Setting Up
1) Connect the power cord to CPAP device and plug into main
electrical outlet.
Once the power cord is plugged into the electrical outlet,
the device is in ready to operate position ("STANDBY" sign
appears in LCD display)
NOTE: The plug is also served to disconnect the
device.
2) Connect one end of the air tubing firmly to the air outlet of
the CPAP.
3) Connect the other end of the air tubing to the mask
system. Putting on the mask and headgear according to
the mask instruction manual.
6