Apex XT Prime Instructions D'utilisation page 12

XT Prime /English
provides higher pressure variation.
(5) Low Pressure Auto Off
"MENU"
Press
Off setting is enabled and the device will be automatically turned off while detecting a large
leak for 3 minutes. This setting is adjustable only by the provider, a respiratory therapist or
physician.
(6) Compliance Meter
"MENU"
Press
total therapy hours for the device. The compliance meter should be re-set only by the
provider, a respiratory therapist or by a doctor.
(7) Alarm
"MENU"
Press
set the alarm on or off. When the alarm is turned on, the audible alarm will activate with
warning messages shown on the LCD display. Set alarm off to mute the audible alarm.
(8) Clock Alarm
"MENU"
Press
button to set the clock alarm on or off. When the clock alarm is set on, the display will show
the time on the left side. Press
the clock alarm is activated, press the start/standby button to mute the audible alarm.
(9) Clock
Press "MENU"
the current time.
(10) Turning off the Device
Remove the power cord from the electrical outlet, and disconnect power cord from the
power socket on the right side of the device.
NOTE:
(11) Event Indication
While the device is on standby mode, press
the latest one data of Apnea Index (AI), Hypopnea Index (HI) and Snoring Index (SI) on the
display. Press
"START/STANDBY"
press
NOTE:
[LOW P on/off]
button to select
button to select the
button to select the
button to select the
"UP"
button to select the
Once the setting is confirmed, press the
will automatically go back to standby without saving the modification if no
action is taken in 20 seconds.
"MENU"
button to show each index in sequence. To go back to standby mode,
button.
AI, HI, SI indexes of the last sleep session with over 15 minutes of usage is
displayed. Index data can be viewed by respiratory therapists or physicians by
using Easy Compliance playback software.
menu, you can view if the Low Pressure Auto
[CM XXXX.X hr]
menu. The compliance meter records the
[Alarm on/off]
menu, and press
[Clock Alarm on/off]
"DOWN"
or button to set the time to wake you up. Once
[Clock XX:XX] menu, press
"MENU"
UP" "DOWN"
and
"UP" "DOWN"
or
"UP"
menu and press
"UP" or "DOWN" button to set
button. Otherwise, the device
button at the same time to see
9
button to
"DOWN"
or