Apex XT Prime Instructions D'utilisation page 14

XT Prime /English
5. Adding a Humidifier
NOTE: When XT Prime CPAP device is used with the heated humidifier, its power supply is from
the power socket outlet of the heated humidifier. Do not connect the power cord to
CPAP device and plug into main electrical outlet.
6. Using the SD Card to Collect Data
If physicians need to review the usage data, they may ask you to use the SD card to copy data
from the device, and to return the card to them. Data that is copied to the SD Card is still stored
and available on the device.
1. Insert the SD Card when the device is in standby mode.
2. Data copying starts automatically when the SD Card is inserted into the slot.
[COPY] & [Card]
3. The
[End] & [OK]
4. The
5. Remove the SD Card and mail it to the clinician.
6. The SD card does not need to be uninstalled for the device to work properly.
CAUTION:
messages are displayed on the LCD while data is being copied.
messages are displayed on the LCD when copying has finished.
Do not remove the SD card until
LCD, or data copied to the card may be corrupted or missing.
XT Prime CPAP device can be used with XT Heated
Humidifier (9S-006500) which is available from the home
care provider. The heated humidifier may reduce nasal
dryness and irritation by providing adequate moisture
and heat to the airflow. Please refer to the XT heated
humidifier (9S-006500) instruction manual for complete
setup information.
[End] & [OK]
messages are displayed on the
11