Components; Transport - Abicor Binzel MFS-V2 Mode D'emploi

4 Components

4 Components
• E-Box
• Connecting cable of E-Box to M-Drive • Control lead of E-Box to robot control (open on one side)
• Operating instructions
Tab. 7
• Hand-held terminal
• Modules for various BUS systems
• Insulating plate for M-Drive mounting
• Wire basket spool holder for wire basket spool K300
Tab. 8
Order the equipment parts and wear parts separately.
Order data and ID numbers for the equipment parts and wear parts can be found in the current catalogue.
Contact details for advice and orders can be found online at www.binzel-abicor.com.

4.1 Transport

The components are carefully checked and packaged, however damage may occur during shipping.
Goods inspection Use the delivery note to check that everything has been delivered.
Check the delivery for damage (visual inspection).
In case of complaints If the delivery has been damaged during transportation, contact the last carrier immediately. Retain the
packaging for potential inspection by the carrier.
Packaging for returns Where possible, use the original packaging and the original packaging material. If you have any
questions about the packaging and/or how to secure an item during shipment, please consult your
supplier.
Tab. 9 Transport
4.2 Storage
Physical storage conditions in a closed room:
 Tab. 2 Ambient conditions for shipment and storage on page EN-5
EN - 8
• M-Drive
Scope of delivery
• Wire conduit for wire drum
• Memory module
• Hot-wire power supply including accessories
Options
MFS-V2