Table Des Matières; Torque Specifications; Tools Required - Warn 83405 Instructions De Montage

Failure to observe these instructions could lead to minor or moderate injury.
 Always take time to fully read and understand the installation and Operations Guide included with this product.
 Never operate this product if you are under 16 years of age.
 Never operate this product when under the influence of drugs, alcohol or medications.
 Always refer to the Installation and Specification Guide, supplied in the winch kit, for all wiring schematics and specific details
on how to wire this WARN product to your vehicle.
I. BEFORE YOU BEGIN
Before you begin disconnect the positive battery lead from the battery.
II. TABLE OF CONTENTS

Torque Specifications

Tools Required

Parts List
Installation
Maintenance/Care
III. TORQUE SPECIFICATIONS
1/4, 6MM 8 lb. ft. (10.8 N-m)
5/16, 8MM 17 lb. ft. (12.5 N-m)
3/8, 10MM 30 lb. ft. (40.7 N-m)
7/16, 11MM 50 lb. ft. (67.8 N-m)
1/2, 12MM 75 lb. ft. (101.7 N-m)
IV. TOOLS REQUIRED
- 10mm, 13mm, 14mm, 15mm, 17mm Socket
- Standard Screwdriver
- 14mm, 17mm wrench
- Socket Driver
- Socket u-joint, extension
CAUTION
Moving Parts Entanglement Hazard
Read installation and operating instructions thoroughly.
NOTICE
Equipment Damage
Read installation and operating instructions thoroughly.
page 2
page 2
page 3
page 4-9
page 10
PAGE 2 83406A0