Senix GTS4QL-M2 Manuel D'instructions page 12

CAUTION:
Do not remove or alter the line cutting blade assembly.
Excessive line length will make the unit overheat. This
may lead to serious personal injury or damage to the
unit.
TIPS FOR BEST RESULTS
• To direct clippings away from the operator, tilt the
cutting head slightly down to the right; whenever
possible swing the trimmer in a left to right cutting
motion. There is an embossed arrow on the top of
the safety guard indicating the preferred left to right
direction of trimmer operation.
• Do not trim wet grass or weeds.
NOTE: Some line breakage will occur from:
• Entanglement with foreign matter
• Normal line fatigue
• Attempting to cut thick vegetation
• Forcing the line into objects such as walls or fence
posts
12 WWW.SENIXTOOLS.COM