KTM 45412955044S Manuel De Montage page 35

–
Remove dust boot
–
Remove fork protector ring
Info
The fork protector ring does not necessarily need to
be removed for repair work.
–
Remove lock ring
501096-01
Info
The lock ring has a specially finished end against
which the screwdriver can be placed.
–
Warm up the outside fork tube in area
ding bushing.
Guideline
50 °C (122 °F)
–
Pull the outside fork tube off the inside fork tube with a
jerk.
Info
The lower sliding bushing must be pulled out of its
501097-01
bearing seat.
–
Remove upper sliding bushing
Info
Without using a tool, pull the stack slightly apart by
hand.
–
Warm up the inside fork tube at the upper end.
Guideline
50 °C (122 °F)
501098-01
–
Loosen sliding bushing support
Socket (T727S)
–
Remove the piston rod.
501099-01
bk
.
bl
.
bm
.
A
of the lower sli-
bn
.
bo
using the special tool.
ASSEMBLY 5
9