Fireplace Xtrordinair ProBuilder 24 CleanFace GSB2 Manuel Du Propriétaire page 16

16

Retirez le cadre en verre en suivant les instructions ci-dessous.
a
Remove the face (lift off - see the instructions included with the face for details).
Open the four latches holding the glass frame in place (start with the bottom three) - follow the
directions shown to the right.
Lift the glass frame up and
b
pull it forward to remove.
Re-Attaching the Glass Frame:
a) Hang the glass frame on the firebox.
b) While holding in place, attach the upper latches
(follow the instructions above in reverse).
c) Lift the glass frame slightly and attach the lower latches.
NOTE: Make sure the glass frame is all the way in place.
© Travis Industries
Maintenance
NOTE:
You may need to lift
the glass frame
while re-attaching.
Replacement Glass Frame Part #
24 CF ProBuilder
5/25/21 – 1514-FR
Latch
Catch
(on glass frame)
270-01523
Top of
Firebox
Glass
PB 24 CF GSB2 Operation