Quick HT4 Mode D'installation Et D'emploi page 13

CORRESPONDENCE BETWEEN PRESSED KEY AND ACTIVATED RELAY
1
3
RRC HT8 THRUSTER
HANDHELD TRANSMITTER
RRC HT8 Thruster handheld transmitter and RRC R06 radio receiver
Pressing the key (anchor ascent) activates relay 1 on the receiver.
Pressing the key (anchor descent) activates relay 2 on the receiver.
Pressing the two keys simultaneously cancels the transmission.
Pressing the key 1 (bow left) activates relay 3 on the receiver.
Pressing the key 2 (bow right) activates relay 4 on the receiver.
A 2 second transmission delay is introduced when passing from the
vice versa.
Pressing the two keys simultaneously cancels the transmission.
Pressing the key (bow-stern left) activates relay 3-5 on the receiver.
key (bow-stern right) activates relay 4-6 on the receiver.
Pressing the
A 2 second transmission delay is introduced when passing from the
versa.
Pressing the two keys simultaneously cancels the transmission.
Pressing the 3 (stern left) activates relay 5 on the receiver.
Pressing the 4 (stern right) activates relay 6 on the receiver.
A 2 second transmission delay is introduced when passing from the
and vice versa.
Pressing the two keys simultaneously cancels the transmission.
Pressing the (bow-stern left) or
Pressing 3 or more keys simultaneously cancels the transmission.
RRC HT4/8 - REV002A
relè 1
2
relè 3
relè 5
relè 7
4
relè 9
relè 11
RRC R06 RADIO RECEIVER
(bow-stern right) key along with any other key will cancel transmission.
ANT
SHIELD
PROG
relè 2
relè 4
relè 6
relè 8
relè 10
relè 12
V+ COM V -
key 1 (bow left) to the
key (bow-stern left)
key 3 (stern left) to the
OPERATION
key 2 (bow right) and
(bow-stern right) and vice
key 4 (stern right)
EN
13