Quick HT4 Mode D'installation Et D'emploi page 12

OPERATION
EN
CORRESPONDENCE BETWEEN PRESSED KEY AND ACTIVATED RELAY
RRC HT4 THRUSTER
HANDHELD TRANSMITTER
RRC HT4 Thruster handheld transmitter and RRC R04 radio receiver
Pressing the key (anchor ascent) activates relay 1 on the receiver.
Pressing the key (anchor descent) activates relay 2 on the receiver.
Pressing the two keys simultaneously cancels the transmission.
Pressing the key (bow left) activates relay 3 on the receiver.
Pressing the key (bow right) activates relay 4 on the receiver.
A 2 second transmission delay is introduced when passing from the
versa.
Pressing the two keys simultaneously cancels the transmission.
Pressing 3 or more keys simultaneously cancels the transmission.
RRC HT4 Thruster handheld transmitter and RRC R06 radio receiver
Pressing the key (anchor ascent) activates relay 1 on the receiver.
key (anchor descent) activates relay 2 on the receiver.
Pressing the
Pressing the two keys simultaneously cancels the transmission.
Pressing the key (bow left) activates relay 3 on the receiver.
key (bow right) activates relay 4 on the receiver.
Pressing the
A 2 second transmission delay is introduced when passing from the
versa.
Pressing the two keys simultaneously cancels the transmission.
Pressing 3 or more keys simultaneously cancels the transmission.
12
NO1
relè 1
NO3
relè 3
V+ COM V -
RRC R04 RADIO RECEIVER
ANT
SHIELD
PROG
relè 2
NO2
relè 4
NO4
relè 11
RRC R06 RADIO RECEIVER
key (bow left) to the
key (bow left) to the
ANT
SHIELD
PROG
relè 1 relè 2
relè 3 relè 4
relè 5 relè 6
relè 7 relè 8
relè 9 relè 10
relè 12
V+ COM V -
key (bow right) and vice
key (bow right) and vice
RRC HT4/8 - REV002A