Programming Tracks And Files; Procedure For Audio Cd; Procedure For Audio Files - JVC RV-NB200BT Notice D'emploi

Programming tracks and files

You can use the remote control to program tracks on an audio CD or files in a sequence of your
choice. The following number of storage locations is available:
Audio CD: 20 memory slots

Procedure for audio CD

1. The source "CD" must be in stop mode, otherwise no programming is possible.
PRG
2. Press the button to start the programming mode.
3. The display now shows "P01 T--001". The second number block shows the current track, the first
number block the current memory location.
4. Use the or button to select the track you want to save to the current memory location.
5. Press the button to confirm the operation.
PRG
6. After that, the next memory location will be displayed. Repeat steps 4 and 5 until your selection is
complete or the number of memory slots is full. In this case "Full" appears in the display.
7. Using the uII button you can start the playback of the programmed tracks.
8. Pressing the button twice clears the programming.

Procedure for audio files

1. The source "USB" must be in Stop mode, otherwise no programming is possible.
2. Press the button to start the programming mode.
PRG
3. The display now shows "P01 F--01 001" an. The first number block shows the current memory
location, the second number block the current folder and the third block the current track number.
4. Using the or
Fold+
5. Use the or button to select the track you want to save to the current memory location.
6. Press the button to confirm the operation.
PRG
7. After that, the next memory location will be displayed. Repeat steps 4 and 6 until your selection is
complete or the number of memory slots is full. In this case "FULL" appears in the display.
8. Using the uII button you can start the playback of the programmed tracks.
9. Pressing the button twice clears the programming.
• If the button is pressed during programming, the process is aborted. Switching off the device
deletes an existing program.
button you can select a folder or keep the current folder.
Fold-
Files: 99 memory slots
15