Accessories - DRILL DOCTOR XP Mode D'emploi

3.
4.

Accessories

Order accessories by contacting us at the phone number listed on the
back cover, or at the retailer where you purchased your Drill Doctor.
3/32" to 1/2" Left-handed Bit Chuck
(for 3/32"-1/2" reverse twist drill bits)
Standard Diamond Sharpening Wheel Kit (180 grit)
Coarse Diamond Sharpening Wheel Kit (100 grit)
62
3/32" to 3/4" Large Bit Chuck
Part # DA70100PF
Part # DA02105PF
Part # DA31320GF
Part # DA31325GF
With Phillips-head
driver, remove the two screws
and wheel retainer.
Remove worn wheel by twist-
ing slightly and lifting wheel
off shaft. Install new wheel
and reinstall wheel retainer
and screws. Don't over-tight-
en mounting screws. Remove
the wrench and replace the
Wheel Access Cover before
turning on the machine.
www.drilldoctor.de
screw-