Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Determining if Replacing the Diamond
Grinding Wheel Is Required
You can double the life of the Diamond Sharpening Wheel by re-
versing it before you replace it. The Sharpening Wheel supplied
with the Drill Doctor
service, with an average of more than 200 sharpenings for 3/32"
to 1/2" drill bits.
The Sharpening Wheel may need to be changed if:
•
Sharpened drill bits burn or turn blue no matter how fast or
slow you rotate the Chuck.
•
When touching the Sharpening Wheel (with the machine un-
plugged), the lower portion feels too smooth (nonabrasive).
•
When sharpening the drill bit, it takes too many halfturns to
sharpen.
Contact the store or dealer where you purchased the Drill Doc-
tor
, or contact Drill Doctor
®
Sharpening Wheel.
Reversing or Replacing Your Diamond
Sharpening Wheel
1.
Wheel Access Cover
2.
www.drilldoctor.de
is designed to give you long and trouble free
®
directly, to purchase a replacement
®
Unplug your Drill Doctor,
make sure machine is cool,
then remove wheel cover.
Use wrench supplied with
your Drill Doctor to hold
sharpening wheel in place.
61
Publicité
Chapitres
Table des Matières
