Niko 10-512 Mode D'emploi page 45

10-512
Sending control function
(11...20)
Press the programmed function
key. Control function 11...20 is
sent on the bus.
alternatingly sending two
control functions
Press the programmed func-
tion key. The first control function
11...20 is sent and the indicati-
on LED lights.
Press the function key once
again. Control function 41...50
is sent and the indication LED
goes out.
Deleting the program-
med functions on the func-
tion keys
Making free function keys of
previously programmed func-
tion keys.
Programming free function keys
- Repeat programming from step 2 onwards.
- The programming mode is automatically exited if no key is pressed for 40s.
EN
Briefly press function key
5. The indication LEDs
simultaneously blink.
Briefly press function key
6. The indication LEDs
simultaneously blink.
Briefly press function
key 7.
The indication LEDs
simultaneously blink.
Briefly press the
free function key
to which you wish
to assign the func-
tion.
The first 7 LEDs
blink.
Briefly press the
free function key
to which you wish
to assign the func-
tion.
The first 7 LEDs
blink.
Briefly press the
function key you
wish to delete.
45