Niko 10-512 Mode D'emploi page 35

10-512
Example of a complete wiring diagram
Note: It is possible to only use power supply 10-801 or 10-802 (3-wire). In this case, you
can max. connect 5 Liberty Plus internal units and 2 external units.
As for larger systems, it is required to use 10-804 or 10-805 in combination with 10-801
or 10-802.
Optionally, you can connect a floor bell push button (a push button with N.O. contact e.g.
05-540) to the connector of the internal unit. Use terminals E and P.
attention: Remove the lamp from the bell push button. If you do not remove the lamp, it
continuously uses power and you can no longer make a call.
EN
10-512
10-512
14 15 16 17 18 19 20 21 22 23 24 25
1 2 3 4 5 6 7 8 9 10 11 12
230V~
fig.4: example of a complete wiring diagram
05-540
05-540
a b
13
12V 1A max
12V 1A max
10-152
P R
35