Emerson EUCLID CF500AP00 Mode D'emploi page 14

BP7519 Euclid CF500-ESF.qxp_CF500 12/2/16 11:18 AM Page 14
5. How to Wire Your Ceiling Fan
5.5
Screw the two threaded studs (supplied) into the tapped
holes in the hanger bracket (Figure 20).
5.6
Lift the ceiling cover up to the threaded studs and turn until
studs protrude through the holes in the ceiling cover
(Figure 21).
Secure the ceiling cover in place by sliding lockwashers
over the threaded studs and installing the two knurled
knobs (supplied). (Figure 21).
Tighten the knurled knobs securely until the ceiling cover
fits snugly against the ceiling and the hole in the ceiling
cover is clear of the downrod.
To avoid possible fire or shock, make sure that the electrical
wires are completely inside the outlet box and not pinched
between the ceiling cover and the ceiling.
WARNING
!
(Continued)
THREADED
STUDS (2)
Figure 20
Figure 21
14
CEILING
COVER
THREADED
STUDS (2)
LOCKWASHERS (2)
KNURLED KNOBS (2)
U.L. Model No.: CF500