EQ
The EQ function controls the gain of different frequency bands. Press and hold the Shift
button, then use the keys marked EQ +/– to select the desired EQ type.
Duet
When the Duet function is in use, the piano is automatically split into two sections: a chord
section in the left hand area and a melody section in the right hand area.
To turn the Duet function on or off, press the Duet button.
To set the split point:
1.
Press and hold the Lower button, then press a key to set the split point at that key. The
default split point is F#3.
2.
Release the Lower button.
To select a Duet type, press and hold Shift, then use the keys marked Duet +/– to select one.
Harmony
With
this
function,
automatically add a harmony effect to your
performance.
1.
Press and hold the Shift button, then press the Harmony button to turn this function
on/off.
2.
Press and hold the Shift button, then use the keys marked Harmony +/– to select the
desired harmony type.
Lesson Mode
In Lesson Mode, the piano will be divided into two areas with the same pitch and voice.
1.
Before entering Lesson Mode, the default voice of the right hand and left hand is the
upper voice you select. You can press one of the Voice Direct buttons or the +/Yes or –
/No button to choose a voice.
2.
Press and hold the Shift button, then press the Lesson button to enter Lesson Mode. In
Lesson Mode, Dual and Split functions are unavailable.
3.
Press and hold the Lower button, then tap a key between C3 and C6 to set the split
point for the lesson, and then release the Lower button.
4.
Press and hold the Shift button, then use the keys marked Octave +/– to set octave
value of the lesson.
Note: The Lesson function is not selectable in Song Mode.
12
Parameter
1
2
3
4
5
the
system
will
EQ Type
Standard
Modern
Rock
Classic
Jazz
Parameter
1
2
3
Harmony Type
Fifth
Octave 1
Octave 2