First Start-Up; Control Elements - Broncolor Siros 400 Mode D'emploi

2.

FIRST START-UP

1. Remove protective cover
3. Switch the unit on at the main switch
10
2. Plug in mains cable
lamp
lamp
test
test
3.

CONTROL ELEMENTS

Element
speed full rf
speed full rf cell
lamp seq prop WiFi
lamp seq prop WiFi beep sync HS
beep sync st/ch
test test
test test
Menu functions
speed full rf cell
speed full rf cell
speed full
speed full rf cell
lamp seq prop WiFi HS
seq prop WiFi HS
lamp seq prop
seq prop WiFi HS
speed
speed
full rf
beep sync st/ch
beep sync st/ch speed full
beep
speed full rf cell
beep sync st/ch
lamp seq
lamp seq prop WiFi
test test
speed full
test
lamp seq prop
test test
test
lamp seq prop WiFi HS
beep sync
lamp seq prop
beep
beep sync st/ch
test
test test
beep
test
test test
test
Function
Rotary controller (2) Switches the unit on and off (stand-by mode).
Pressing on the rotary controller for 3 s switches
the unit to stand-by.
In menu: menu navigation and confirmation of menu
cell
items. There is an explanation of menu navigation in
chapter 5.
In operation: changes the flash energy. Turning anti-
clockwise reduces the flash energy, turning clockwise
HS
increases it. Turning slowly changes it in 1 / 10 f-stop
steps, turning fast ("twisting") in 1 / 1 f-stop steps.
Info display (4) st/ch Shows the flash energy selected, or the menu selection
options.
Mod Switches the modelling light on or off. A longer press
Modelling light changes the operating mode from "full" to "prop"
on / off (1) or vice versa.
Test (5) Starts test: the "Ready" display around the rotary
controller changes to blue as soon as the
charge / discharge operation has been completed.
Speed (13) For fast charging and flash times. See explanation
rf cell
in chapter 6.
WiFi (12) Indicates whether WiFi is switched on or off.
HS (11) Indicates whether HS is switched on or off
WiFi HS
full rf cell
(Siros 800 / 800 S only).
cell
Studio / Channel (10) For switching the current studio channel ( RFS 2)
rf cell
sync st/ch
Lamp (9) For selecting the lamp channel ( RFS 2)
prop WiFi HS
HS
rf cell
Sequence (8) To select the number of flashes.
WiFi HS
beep sync st/ch
Beep (7) Shows if the acoustic "Ready" warning is switched
st/ch
on or off.
WiFi HS
sync st/ch
Sync (6) Permits the selection of different methods of release
(photocell, radio, photocell and / or radio).
test
Sync socket / For release via the sync cable, or software update
sync st/ch
test
Mini USB (15 / 16) via Mini USB .
On / Off (17) Switches the unit on or off.
test
11