OPERATION ______________________________
C
4
Press the
button to switch off the
appliance after use.
Skin close cut of body hair
Please use the body hair trimming
1
head
.
1
If necessary, remove the attachment
by pressing in both side catches
and lifting off.
2
Insert attachment
top and press down until it clicks into
place.
C
3
Press the
button to switch on the
appliance and start trimming your
body hair.
Notes
Do not apply strong pressure when
7
cutting, as this may cause skin injury.
Clean the body hair trimming head
7
1
with the cleaning brush supplied.
C
4
Press the
button to switch off the
appliance after use.
Trimming body hair to a
certain length
Please use the body hair trimming head
1
and attachment comb
1
If necessary, remove the attachment
by pressing in both side catches
and lifting off.
B
1
carefully at the
2
.
B
2
Insert attachment
top and press down until it clicks into
place.
3 Push the attachment comb
ly and firmly onto the rounded rear
half of the cutting head from above
and let it click into place.
Note
To adjust the attachment comb
7
attach it in one of the three side rails
of the body hair trimming head
The nearest rail to the trimming
blades will adjust the attachment to
9 mm, the middle rail to 5 mm and
the outer rail to 2 mm.
C
4
Press the
button to switch on the
appliance and start trimming your
body hair.
C
5
Press the
button to switch off the
appliance after use.
1
carefully at the
2
careful-
2
1
ENGLISH
29
,
.