Introduction; Intended Use; Features; Package Contents - Parkside PASSK 20-Li A1 Traduction Des Instructions D'origine

CORDLESS VEHICLE IMPACT
WRENCH 20V PASSK 20-Li A1

Introduction

Congratulations on the purchase of your new appli-
ance . You have chosen a high-quality product . The
operating instructions are part of this product . They
contain important information about safety, usage
and disposal . Before using the product, please
familiarise yourself with all operating and safety
instructions . Use the product only as described and
for the range of applications specified . Please also
pass these operating instructions on to any future
owner .

Intended use

This appliance is intended for screwing in and
unscrewing screws as well as for tightening and
loosening nuts . The appliance has a clockwise/
anticlockwise rotation, a 1/2" external square
drive bit holder and an LED working light . The light
on this appliance is intended to illuminate the im-
mediate working area of the appliance . The rotary
impact function of the appliance enables the power
of the motor to be converted into uniform rotary
impacts . The impact mechanism comes into effect
during tightening and loosening .
The appliance is designed for use by adults . Young
people under 16 years of age may only use the
appliance under supervision . The manufacturer ac-
cepts no liability for damages caused by improper
use or incorrect operation of the appliance .
Use this product only as described and for the
areas of applications specified . The appliance is
not intended for commercial use . Any other usage
or modification of the appliance is deemed to be
improper and carries a significant risk of accidents .
The manufacturer accepts no responsibility for
damage(s) attributable to misuse .
■ 2 │ GB │ IE

Features

Tool holder
Rotation direction switch/lock
Belt clip
Battery charge level button
Battery display LED
Battery pack
Release button for the battery pack
LED work light
Torque preselection button
ON/OFF switch / speed control
Sockets (17/19/21/23 mm)
High-speed charger
Red charge control LED
Green charge control LED

Package contents

1 cordless vehicle impact wrench 20V
PASSK 20-Li A1
1 high-speed battery charger PLG 20 C3
1 rechargeable battery PAP 20 B3
4 sockets (17/19/21/23 mm)
1 belt clip
1 carrying case
1 set of operating instructions

Technical data

Cordless vehicle impact wrench 20V
PASSK 20-Li A1
Rated voltage
Idle speed
Rated stroke rate
Max . torque
Torque selectable at 5 levels
Tool holder
20 V (DC)
0–2300 rpm
0–3000 rpm
400 Nm
100/150/200/
300/400 Nm
1/2"
PASSK 20-Li A1