Megger TDR1000 Manuel Utilisateur page 5

•
The instrument should not be used if any part of it is damaged.
•
Test leads, probes and crocodile clips must be in good order, clean and with no broken or cracked insulation.
•
Check that all lead connections are correct before making a test.
•
Disconnect the test leads before accessing the battery compartment.
•
Refer to operating instructions for further explanation and precautions.
•
Safety Warnings and Precautions must be read and understood before the instrument is used. They must be observed during use.
THE INSTRUMENTS MUST ONLY BE USED BY SUITABLY TRAINED AND COMPETENT PERSONS
NOTE
.
5