Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Remote activation via phone (only on battery-powered model)
By connecting a suitable telephone interface to the terminals
from your phone:
1. Remote activation of the timed Manual program: to activate this program the input (terminals
must be closed for at least 2 secs and not more than 5 secs. WARNING: timed manual mode can be disabled
in advance by closing the input (terminals
2. Remote activation of Manual program: to activate this program it is necessary to close and keep closed
the input (terminals
the device back to its previous conditions.
); reopening the input causes deactivation of the manual program and takes
you can carry out two types of activation
) for at least 2 secs and not more than 5 secs.
Compiling the timed manual program remotely
If you have chosen to connect to the terminals
a suitable telephone interface A
( ), pressing the
screen in figure B.
Using the
A
ature for the two types of remote activation
can be set.
Note. A reference temperature must be set
for the Heating mode
Cooling mode .
Pressing the
in figure C.
B
Using the
hours) of the timed manual program can
be set remotely.
Press the
parameter to be configured.
C
button brings up the
arrows the reference temper-
and one for the
button brings up the screen
arrows the duration (in
button to move on to the next
)
Publicité
Table des Matières
