CAME BPT TH/500 Manuel D'installation Et D'utilisation page 37

Exclusion from thermal control
To activate this mode press button
icon appears B.
until the
If the system is in "Heating" mode, the
frost-protection function remains on.
The frost-protection temperature set is shown
for a few seconds, then the current time and
A
temperature detected are displayed.
If the system is in "Cooling" mode, the control
will be totally excluded.
B
Other information that can be
displayed on the main page
By briefly pressing on the area where the
temperature detected is displayed C, the
objective temperature (set point) is displayed
in place of the time D.
Press again on the area where the temper-
C
ature detected is displayed to return to the
previous display mode.
Displaying the temperature detected
by an external probe
If an external probe, set as secondary, is
connected to the device, by briefly pressing
on the area where the temperature detected
D
is displayed C, the temperature detected
by the external probe is displayed in place
of the time E.
Press again on the area where the tempera-
ture detected by the main probe is displayed
to return to the previous display mode.
E
A