Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Operation of device
When first turned on, A the programmable thermostat is in automatic heating
temperature detected is shown on the display. On the diagram the column corresponding to the current
time is flashing and the arrow indicates the day of the week.
NOTE. When the device is in stand-by, the first touch on the screen switches on the back-lighting and
does not carry out any command.
Setting date and time
Touch the clock area A and keep touching it
until the minutes start to flash B.
Use the
value and the
adjusting the time.
A
Press the
following, using the arrows:
- Minutes
- Hour
- Year
- Month
- Day
- Day of the week (indicated by the arrow C)
B
- Format of time displayed (12 or 24 hr)
- Enable/disable automatic change to and
from daylight savings time D.
Prolonged pressing of the
takes you to the desired value more quickly.
C
Note. If no button is pressed for a few sec-
onds, the device goes back to the main screen
and the values inserted are considered valid.
D
mode; the
arrows to set the desired
button to move on to
button to see and set the
buttons
Publicité
Table des Matières
