Emptying The Drum; Blowing Feature - Workshop WS0400SS0 Mode D'emploi

Emptying the Drum

WARNING: To reduce the risk of
injury from accidental starting,
unplug power cord before emptying
the drum.
1. To remove the lid to empty contents of
drum, simply lift the two drum latches
on the side of the Vac and lift the lid
up and off the drum and set to the
side.
2. Set the lid on a clean dry area while
emptying the drum or changing the Filter.
3. Dump the drum contents into the
proper waste disposal container.

Blowing Feature

Your Wet/Dry Vac has the capability to be
used as a blower for yard work, patio
cleanup and workshop applications to
blow sawdust and other debris.
WARNING: Always wear safety
eyewear complying with ANSI Z87.1
(or in Canada, CSA Z94.3) before
using as a Blower.
WARNING: To reduce the risk of
injury to bystanders, keep them
clear of blowing debris.
CAUTION: Wear a dust mask if
blowing creates dust which might
be inhaled.
CAUTION: To reduce the risk of
hearing damage, wear ear protectors
when using the Vac/Blower for
extended hours or when using in a
noisy area.
OPERATION (continued)
12
Pull Up
And
Lift Out
Power Head
Assembly
Drum
Latch (2)
Drum