Preparation - Q Acoustics 3060S Manuel Du Propriétaire

Preparation

Lift the speakers from the cartons by holding the cabinets. Do not touch
the driver units or use the protective bags to lift them. The 3050i and
3060S are heavy - get assistance to lift them if necessary.
Thread the locking nut onto the spike and screw all four spikes into the feet on the subwoofer. If
you have a wood or stone floor push a spike protector over each spike before turning the speaker
upright. When the speaker is the right way up adjust all the spikes until the loudspeaker is level
and stable.
Spikes are sharp. Exercise care!
Never place a spiked loudspeaker where it can cause damage!
Always move your loudspeakers by lifting them - never drag them!
5