Q Acoustics 3060S Manuel Du Propriétaire page 13

Stereo System
Connect a good quality stereo RCA phono lead to the L and R inputs on the 3060S and connect
the other end to the PRE OUT sockets on the rear of the amplifier.
The subwoofer will automatically add the L and R signals together so that no information is
missed. If you wish to use two subwoofers then you can run a single RCA phono cable to each
subwoofer and thus have a stereo subwoofer system.
Ensure that the L output on the amplifier goes to the left hand side subwoofer and R to the right
hand side to preserve the stereo image of the main speakers. The subwoofers will need to be
placed close to their respective main speakers and the set-up will need to be done separately for
each subwoofer.
STEREO AMPLIFIER
RIGHT LEFT PRE OUT
+
L
FRONT LS
-
R
13
SUBWOOFER
LINE IN
LEFT /
MONO
RIGHT