Assign Static Ip Address To Camera - Urmet NVR Boost 2.0 Série Guide Rapide

For IP cameras it is suggested not to change the default parameters in the fields [Port: 80] and [Protocol:
Private].
4. Click on [Add] and the camera will be online and its images will be displayed in the LIVE grid.
NOTE
Resolution, frame rate and bit rate depend on IP camera features.
For further details, see the instruction manual in the CD provided with the product.
4.3

ASSIGN STATIC IP ADDRESS TO CAMERA

If the IP camera has been configured in DHCP mode, it is suggested to change its address from dynamic to static, in
order to avoid connection loss between the NVR and the camera.
To change the camera addressing mode, access the NVR OSD menu (default password: 00000000), open the page
[Display → IP Camera] and click on the blue icon (circled in red in the figure below) of the respective channel:
DS1093-133B 39