Add Camera By Manual Assignment - Urmet NVR Boost 2.0 Série Guide Rapide

Now the camera will be correctly displayed in LIVE grid.
4.2

ADD CAMERA BY MANUAL ASSIGNMENT

The procedure described in this paragraph represents an alternative to the one illustrated in the previous paragraph
(4.1).
To manually assign IP cameras to NVR channels:
1. Directly from the LIVE display grid or accessing before the OSD menu (default password: 00000000) at the
page [Display → IP Camera], click on the + button to add the IP camera to the respective channel, as
shown in the figure below:
2. Click on [Search] to find the IP cameras in the network.
3. Select a camera from the list and fill in the empty fields on the right, i.e.: [Alias]: enter a name for the
camera and [Password]: enter the camera password (default: admin).
DS1093-133B 38