Ip Camera Configurations; Add Camera By Automatic Assignment - Urmet NVR Boost 2.0 Série Guide Rapide

4

IP CAMERA CONFIGURATIONS

4.1

ADD CAMERA BY AUTOMATIC ASSIGNMENT

To quickly add the IP cameras in the NVR, access the OSD menu (default password: 00000000), open the page [Display
→ IP Camera] and select [Auto assign] as shown in the figure below.
If cameras are correctly added, they are displayed in the list with a green arrow and automatically LIVE displayed on the
monitor.
If for any reason the NVR doesn't connect to the camera, this one is displayed in the list with a grey arrow and its images
aren't displayed.
If the NVR doesn't connect to the camera, the user has probably configured in the camera a password different from the
default one (admin); in this case, click on the "green pencil" icon (circled in red in the figure below).
Change the camera current password used by the NVR, as shown in the figure below, then confirm.
DS1093-133B 37