Chapter 4 : Lcd Screen Description; Status Menu - Analog way STUDIO SCAN XTD825 Manuel Utilisateur

STUDIO SCAN XTD825 / 625™

Chapter 4 : LCD SCREEN DESCRIPTION

4-1. INTRODUCTION
The LCD screen is composed of 2 modes: the STATUS MODE and the CONTROL MODE.
• The STATUS MODE indicates the input and output status of the STUDIO SCAN XTD825 / 625
• The CONTROL MODE allows to select and adjust the parameters of the STUDIO SCAN XTD825 / 625
4-2. LCD CONTROL BUTTONS
The LCD screen is controlled by 2 buttons and 1 knob:
knob:
EXIT / MENU button:
ENTER button:
NOTE: When entering in the CONTROL MODE, the LCD window will automatically display the STATUS MODE
after 60 seconds of inactivity of the front panel buttons.
4-3. STATUS MODE
When switching ON, the LCD SCREEN shows the product's name and reference as follows:
Device designation.
Device version.
Synchronization mode.
Output standard.
Output frame rate.
Input format.
Horizontal input frequency.
Vertical input frequency.
To scroll thru the different menus.
• From the STATUS MODE, press this button to display the CONTROL MODE.
• From the CONTROL MODE, press this button to:
- return to the previous menu without safeguarding the selection.
- return to the STATUS MODE (press several times).
• From the STATUS MODE, press this button to return to the last consulted menu.
• From the CONTROL MODE, press this button to confirm a selected item.
STUDIO SCAN XTD825
Version _._
output
internal
input
H = 60.1 K
NTSC
59.94 Hz
SVGA
V = 75 Hz
™
.
™
.

STATUS MENU

STATUS MENU
STATUS MENU
PAGE 9