Chapter 7 : Updating The Studio Scan Xtd825 / 625; Update Instructions - Analog way STUDIO SCAN XTD825 Manuel Utilisateur

Chapter 7 : UPDATING THE STUDIO SCAN XTD825 / 625

The STUDIO SCAN XTD825 / 625
connector.
7-1. CONNECTIONS:
Connect the "REMOTE CONTROL RS-232" connector of the STUDIO SCAN XTD825 / 625
of your COMPUTER with a DB9 M/F straight cable.
Connect the STUDIO SCAN XTD825 / 625
Switch OFF the STUDIO SCAN XTD825 / 625

7-2. UPDATE INSTRUCTIONS:

Open the file "Updater825 " (in start/Program/ANALOG WAY/XTD825).
Click on "START" on the SOFTWARE.
Press the ENTER button of the STUDIO SCAN XTD825 / 625
simultaneously (FRONT PANEL SWITCH = I ). All front panel LEDs switch ON and OFF, the LCD screen
displays Downloading, and the upgrade will start. Then you can release the ENTER button.
When the software displays "Program operation completed", SWITCH OFF and ON the STUDIO SCAN XTD825 /
™
625 with the FRONT PANEL SWITCH.
Click on the "Quit" button to close the update SOFTWARE.
NOTE: YOUR STUDIO SCAN XTD825 / 625
NOTE: THE UPDATER FILES ARE AVAILABLE ON OUR WEB SITE: www.analogway.com
PAGE 14
™
can be update thanks a COMPUTER (PC) via its REMOTE CONTROL (RS-232)
™
to an AC power outlet.
™
(FRONT PANEL SWITCH = O).
™
IS NOW READY TO WORK.
STUDIO SCAN XTD825 / 625™
™
™
(FRONT PANEL), and SWITCH it ON
™
to the SERIAL port