Chapter 5 : Lcd Functions Description - Analog way STUDIO SCAN XTD825 Manuel Utilisateur

STUDIO SCAN XTD825 / 625™

Chapter 5 : LCD FUNCTIONS DESCRIPTION

1 [INPUT MENU] + ENTER.
[input status] + ENTER.
1-1
Displays the input status.
• [INPUT]:
• [GENLOCK]: [none] = genlock signal not detected.
[Input type] + ENTER. (Available on XTD825 version with optional DVI input)
1-2
Select one of the following input type with
• [analog] = Analog computer source connected to the HD15 input connector.
• [DVI] =
[Genlock H. ph.] + ENTER.
1-3
This function allows to adjust the genlock horizontal phase. Adjust with
[Genlock Sc. ph.] + ENTER.
1-4
This function allows to adjust the genlock Subcarrier phase. Adjust with
[SOG input] + ENTER.
1-5
Select [Yes] if your input signal is in RGsB (SOG), and valid with ENTER.
[H sync load] + ENTER.
1-6
Select the Horizontal sync load of your input signal with
[Genlock load] + ENTER.
1-7
Set on Hi-Z if the genlock out is used.
2 [OUTPUT MENU] + ENTER.
[output status] + ENTER.
2-1
Displays the output status.
[output std.] + ENTER.
2-2
Select one of the following standard with
• [NTSC] = NTSC standard for composite and S.VIDEO output and 60Hz frame rate for RGB/S and YUV
• [PAL] =
• [NTSCj] = NTSC japan standard for composite and S.VIDEO output and 60Hz frame rate for RGB/S and
[output rate] + ENTER.
2-3
Select one of the following functions with
• [internal] = The output standard depends of the selected output standard in LCD menu # 2-2.
• [genlock] = The output standard is synchronized onto the genlock input standard.
[RGB/YUV out] + ENTER.
2-4
Select the RGB/YUV wanted output with
• [YUV] = component video output.
• [RGBS] = RGB/S video output.
• [RGsB] = RGB with Sync On Green video output.
[test pattern] + ENTER.
2-5
Select one item with
• [yes] = displays a test pattern onto the output.
• [no] = turns OFF the test pattern.
[XGA] = input format.
[60 Hz] = input frame frequency.
Digital computer source connected to the DVI input connector.
output.
PAL standard for composite and S.VIDEO output and 50Hz frame rate for RGB/S and YUV
output.
YUV output.
+ ENTER.
+ ENTER:
+ ENTER.
+ ENTER:
+ ENTER.
+ ENTER.
+ ENTER.
+ ENTER.
PAGE 11