Christopeit Sport E 2000 Notice De Montage Et D'utilisation page 21

4. WATT: independent watt program:
When selecting the program, select the WATT category using the +/-
keys and confirm with the F -key. Calling up the default options WATT /
TIME / DISTANCE / CALORIES / PULSE by pressing the F -key and setting
the values using the +/- keys. The default setting for the WATT value is
100, the value can be changed from 10 to 350 watts in 5 watt steps. The
WATT value is set with the +/- keys. The entered WATT value remains
independent of the pedal speed constant through automatic adjust-
ment of resistance. Use the START/STOP -key to start the watt program.
5. PERSONAL: individual programs:
When selecting the program, select the PERSONAL category using the
+/- keys and confirm with the F -key. Create your own program profile.
With this program you can determine the resistance of each section
(16 bars) yourself. Set the desired resistance for the first bar using the
+/- keys and confirm the entry using the F -key. Proceed in the same
way for all 16 bars and start the program after the last bar entry using
the START/STOP -key. Call up the preset options TIME / DISTANCE / CA-
LORIES / PULSE by interrupting the program with the START/STOP -key,
press the F -key to call up preset functions. Set the values using the +/-
keys. The set program profile is saved automatically. (U0 can be set in
the same way as U1 ~ U4, only this data cannot be saved.)
6. H.R.C .: pulse programs
When selecting the program, select the H.R.C. category using the +/-
keys and confirm with the F -key. The pulse programs 55%, 75% and
90% are based on the age input of the respective user (U0-U4) and use
this to calculate the upper pulse limit 55%, 75% or 90% of the maxi-
mum heart rate value. For the target heart rate program, enter the de-
sired upper heart rate limit directly using the +/- buttons.
The PULSE display flashes as soon as the upper pulse limit is reached
during training.
55% -- DIET PROGRAM
75% -- HEALTH PROGRAM
90% -- SPORTS PROGRAM
TAG—USER SET TARGET HEART RATE
TEST (RECOVERY):
When you have finished your workout, press Test-key. For RECOVERY to
function correctly, it needs your Heart Rate input. TIME will count down
from 1 minute and then your fitness level from F1 to F6 will be display-
ed. (See table under Fitness Test Program). NOTE: During RECOVERY,
no other displays will operate. If the battery is not fully charged, this
test function would have to be accompanied by a slight pedaling move-
ment.
PULSE RATE
1. Hand pulse measurement:
On the left and right handlebar grip part two metal contact plates are
insert as pulse sensors. Please take care that both hands at the same
time in normal force on the sensors. During the heartbeat measure-
ment a heart symbol flashes next to the pulse display. (The hand pulse
measurement serves only for orientation, as it is caused by movement,
friction, sweat etc. it can come to deviations from the actual pulse.
A few people may cause malfunctions of hand pulse measurement.
Should you have trouble with the hand pulse measurement, we recom-
mend the use of a cardio chest belt.)
„WARNING" Heart rate monitor systems may be inaccurate. Excessive
exercising can lead to serious damage or maybe to death. If dizziness or
weakness is felt, stop exercising immediately.
2. Cardio - Pulse Measurement:
On the market, cardio pulse measurements are available, which consist
of a transmitter chest belt and a watch receiver or only chest belt. The
computer of your crosstrainer has build in receiver (without sender)
and with using a suitable chest belt for cardio pulse measurement the
computer can show the pulse data. This works with all un-coded chest
belts with transmission frequency is between 5.0 - 5.5 kHz. The range
of the transmitters depends on the model approx.. 1m. (Christopeit-
Sport Pulsebelt: 9309)
ATTENTION: If both pulse measuring methods are used simultaneously
Hand pulse measurement takes precedence.
WATT TABELLE
RPM and Power in Watt of Level 1 - Level 24 for E 2000
Art.-Nr. 2002
LEVEL 20 RPM
WATT
3
1
2
5
6
3
4
9
5
11
13
6
7
15
17
8
9
19
10
22
23
11
26
12
27
13
28
14
31
15
33
16
38
17
42
18
48
19
56
20
62
21
71
22
78
23
83
24
Remarks:
1.The power consumptions (Watt) are adjusted by measuring the dri-
ving speed (min-1) of axle and the braking torque (Nm).
2.Your equipment was tested to fulfill the requirements of its accuracy
classification before shipment, If you have doubts about the accuracy,
please contactwith your local retailer or send it to accredited test labo-
ratory to ensure or calibrate it.
(Please note that a deviation tolerance as noted on page 14, is permis-
sible.)
NOTE
1. Operationally, the ergometer with generator has got in different
speeds a little more or less rough construction noise, which is normal.
2. Keep moisture away from computer.
3. The USB port socket on side of the computer can use for charging of
small devices during exercising. The loading data are 5V / 0.35A-1A
4. An accumulator pack with 6V/1300mAh is located in the accu com-
partment at backside of computer. For replacement, open the accu
compartment, remove the accu pack, disconnect and replace it with an
identical model. The lifetime of accu depends on the charging frequen-
cy. (Maximum buffering of the display approx. 80 sec.)
21
30 RPM 40 RPM 50RPM 60 RPM
WATT WATT WATT WATT
7 17 38
11
18 27 48
11
14 23 38 58
32 68
20 50
23 40 65 78
28 47 77 88
33 56 88 98
38 65 108
100
42 72 118
110
46 79 128
120
87 132 138
50
56 140 148
95
158
59 101 152
62 106 162 168
67 175 178
115
72 185 188
125
80 134 198
192
88 145 208
200
208 218
95 152
160 228
102 219
168 230 238
111
181 239 248
120
258
129 190 251
140 260 268
200
GB