Christopeit Sport E 2000 Notice De Montage Et D'utilisation page 18

STEP 5:
Installation of the handgrip cover sets (8+48) at con-
necting tubes (7).
1. Mount the left handgrip cover set (8L-1+8L-2)
to left connection tube (7L) and secure with screws
(31).
2. Install the right handgrip cover set (48R-1+48R-2)
to the right connection tube (7R) and secure with
screws (31+103).
STEP 6:
Attach the pulse grip (55) at handlebar support (3).
1. Put the computer cover (37) onto the ends of
pulse grip (55).
2. Guide the pulse grip (55) through the appropri-
ate holder of support (3) and adjust the holder so
that the holes and threats align. Put on each screw
M8x25 (9) a spring washer (12) and washer 8/16 (14)
and tighten the pulse grip (55) at the support (3) frm-
ly.
3. Put the pulse cable (51) through the hole at sup-
port (3) into top position.
18
GB