Installation Of The Swimming Pool Heat Pump - AQUA FORTE ZWPA Serie Manuel D'installation Et D'utilisation

2.1 Installation of the swimming pool heat pump

Remark:
The delivery of the pool heat pump only includes the swimming pool heat pump, other necessary parts
must be purchased separately.
Attention:
Please follow these steps carefully when installing the heat pump:
√ The heat pump must always be placed on a firm, flat surface. Always use vibration dampers to
avoid vibration and unnecessary noise production.
√ The heat pump must always remain in upright position (even during transport). It is recommended
that the heat pump stands steady for at least 24 hours after transport or movement before you
turn on the system.
√ The heat pump may only be serviced by an authorized installer.
√ Always use original parts! The use of other parts than the original ones, may lead to efficiency
problems and/or damage the unit.
Warranty is only applicable when:
√ The heat pump is installed in accordance with the guidelines in this manual.
√ The electrical supply and security components such as circuit breaker and fuses meet the
requirements in your local area's guidelines.
√ The installation meets the hydronic conditions as stated in the technical specifications on page 5.
√ Placement of the heat pump is in accordance with the terms and conditions on page 8/9
√ The heat pump is switched in the right way
√ The heat pump is serviced by a certified technician on a yearly basis
√ The unit is not exposed to frost